
1592015300 User manual iCHILL 200 L GB r1.3 09/09/2005
1 GENERAL ADVICE
• 1.1 PLEASE READ BEFORE USING THIS MANUAL
• · This manual is part of the product and should be kept near the
• instrument for easy and quick reference.
• · The instrument shall not be used for purposes different from those
• described hereunder. It cannot be used as a safety device.
• · Check the application limits before proceeding.
• 1.2 SAFETY PRECAUTIONS
• · Check the supply voltage is correct before connecting the instrument.
• · Do not expose to water or moisture: use the controller only within the
• operating limits avoiding sudden temperature changes with high
• atmospheric humidity to prevent formation of condensation
• · Warning: disconnect all electrical connections before any kind of
• maintenance.
• · The instrument must not be opened.
• · In case of failure or faulty operation send the instrument back to the
• distributor or to “Dixell s.r.l.” (see address) with a detailed description of
• the fault.
• · Consider the maximum current which can be applied to each relay (see
• Technical Data).
• Ensure that the wires for probes, loads and the power supply are separated
• and far enough from each other, without crossing or intertwining.
• · Fit the probe where it is not accessible by the end user.
• · In case of applications in industrial environments, the use of mains
• filters (our mod. FT1) in parallel with inductive loads could be useful.
urenrjrjkvnm
Med