Emerson World Class 3000 Bedienerhandbuch PDF herunterladen (Seite 114)

Instruction Manual

Appendix EX Rev. 1.3

January 1997

E-2 Appendices Rosemount Analytical Inc. A Division of Emerson Process Management

World Class 3000

Table E-1. Specification for Intelligent Field Transmitter

Electrical Classification ................................................................. EExd II BT6 (IP65)

Humidity Range ............................................................................ 95% Relative Humidity

Ambient Temperature Range ....................................................... 0° to 50°C (32° to 122°F)

Vibration ........................................................................................ 5 m/sec

, 10 to 500 xyz plane

External Electrical Noise ............................................................... Minimum interference

*Communications .......................................................................... 1 RS-422 for printer

1 RS-485 for field communications

(CRE 3000 or IBM PC)

Analog Outputs ............................................................................. Isolated, 0-20 mA, 4-20 mA, 0-10 V, 20-0 mA,

20-4 mA, or 10-0 V output

Accuracy (analog output) ......................................................... 0.1% O

or +3% of reading, whichever is

greater using Hagan test gases

Range ...................................................................................... Field selectable

Power Supply ................................................................................ 100/120/220/240 +10% Vac at 50/60 Hz

Power Requirements .................................................................... (w/HP S 3000): 30 VA (Watts)

(w/WC 3000 Probe): 275 VA (Watts)

Installation Category (Overvoltage Category) ............................... IEC 664 Category II

Output Resolution ......................................................................... 11 bits (1 bit = 0.05% of output F.S.)

System Speed of Response (amplifier output) ............................. Less than 3 seconds

Resolution Sensitivity - transmitted signal .................................... 10.01% O

Deadman Contact Output ............................................................. Form-C, 48 Volt max, 100 mA max

Programmable Contact Outputs ................................................... 2 available, Form-C, 48 V max, 100 mA max

Displays (optional) ......................................................................... 1, with 2.03 cm (0.8 in.) high, 3-character,

alphanumeric LED display

Operator Interface (optional) ......................................................... 4-line by 20-character backlight LCD alpha-

numeric display; 8-key general purpose

keyboard

Approximate Shipping Weight ...................................................... 23 kg (50 lbs)

*Available at future date.

d. LDP Field Electronics Board (optional)

The LDP field electronics board, which is

part of the LDP assembly, may be installed

in two possible configurations. The first

configuration consists of an LED display

which displays the current O

value. The

display also has indicating LEDs for high

test gas (TGH), low test gas (TGL), and

calibrating (CAL).

The second possible configuration consists

of the LED display with four membrane

keys. This configuration is used only when

the IFT has not been equipped with a GUI

multipurpose board. The four membrane

keys only allow for calibration to be selected

and test gas values to be changed.

e. GUI Multipurpose Board (optional)

The GUI multipurpose board, which is part

of the GUI assembly, has a 4-line by 20-

character liquid crystal display (LCD) and

eight membrane keys. All operator-set vari-

ables are input using the LCD screen and

keyboard.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 157 158

Kommentare zu diesen Handbüchern

Keine Kommentare

Emerson World Class 3000 Bedienerhandbuch Seite 114

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sauerstoffausrüstung Emerson World Class 3000