Emerson 3051S Spezifikationen Seite 38

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 240
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 37
Reference Manual
00809-0100-4801, Rev FA
October 2010
Rosemount 3051S Series
2-24
7. Subtract the number of threads showing (after tightening) from the total
threads to calculate the revolutions engaged. Further tighten until a
minimum of 3 rotations is achieved.
8. For block and bleed manifold, verify the bleed screw is installed and
tightened. For two-valve manifold, verify the vent plug is installed and
tightened.
9. Leak-check assembly to maximum pressure range of transmitter.
Rosemount 304
Conventional Manifold
Installation Procedure
To install a 304 Conventional Manifold to a 3051S transmitter:
1. Align the Conventional Manifold with the transmitter flange. Use the four
manifold bolts for alignment.
2. Finger tighten the bolts, then tighten the bolts incrementally in a cross
pattern to final torque value. See “Flange Bolts” on page 2-6 for complete
bolt installation information and torque values. When fully tightened, the
bolts should extend through the top of the module housing plane of
flange web (i.e. bolt hole) but must not contact module housing.
3. If applicable, install flange adapters on the process end of the manifold
using the 1.75-in. flange bolts supplied with the transmitter.
Rosemount 305 and 304
Manifold Styles
The Rosemount 305 Integral Manifold is available in two styles: Coplanar and
Traditional. The traditional 305 Integral Manifold can be mounted to most
primary elements with mounting adapters.
Figure 2-15. Rosemount 305
Manifold Styles
The Rosemount 304 comes in two basic styles: Traditional (flange x flange
and flange x pipe) and Wafer. The 304 traditional manifold comes in two,
three, and five-valve configurations. The 304 wafer manifold comes in three
and five-valve configurations.
Figure 2-16. Rosemount 304
Manifold Styles
305 INTEGRAL
COPLANAR
305 INTEGRAL
TRADITIONAL
304 TRADITIONAL
304 WAFER
Seitenansicht 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 239 240

Kommentare zu diesen Handbüchern

Keine Kommentare