Emerson Network Router Bedienungsanleitung PDF herunterladen (Seite 54)

48 ProLink

II Software for Micro Motion

Transmitters

Transmitter Configuration, Characterization, and Calibration

Figure 5-2 Sample calibration tags – T-Series sensor

Figure 5-3 Sample calibration tags – All sensors except T-Series

Density calibration factors

If your sensor tag does not show a D1 or D2 value:

• For D1, enter the Dens A or D1 value from the calibration certificate. This value is the

line-condition density of the low-density calibration fluid. Micro Motion uses air.

• For D2, enter the Dens B or D2 value from the calibration certificate. This value is the

line-condition density of the high-density calibration fluid. Micro Motion uses water.

If your sensor tag does not show a K1 or K2 value:

• For K1, enter the first 5 digits of the density calibration factor. In the sample tag in Figure 5-3,

this value is shown as

12500.

• For K2, enter the second 5 digits of the density calibration factor. In the sample tag in

Figure 5-3, this value is shown as

14286.

If your sensor does not show an FD value, contact Micro Motion customer service.

If your sensor tag does not show a DT or TC value, enter the last 3 digits of the density calibration

factor. In the sample tag in Figure 5-3, this value is shown as

4.44.

Newer tag Older tag

19.0005.13

0.0010

0.9980

12502.000

14282.000

4.44000

310

12500142864.44

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 95 96

Keine Kommentare

Emerson Network Router Bedienungsanleitung Seite 54