Emerson Liebert APS Bedienungsanleitung PDF herunterladen (Seite 66)

Operation and Display Panel

Liebert

APS

™

4.5.5 Module Replacement Screen

From the main screen, press the F4 button nine times until the module replacement screen is

displayed, as shown in Figure 67.

Figure 67 Module replacement screen

The module replacement screen displays the procedures for replacing all user replaceable module

assemblies in the UPS frame.

To view the procedure, press the F5 button to enter the module replacement. One module option is

highlighted. Press the F3 or F4 button to navigate to the specific module procedures, and then press

the F5 button to view the procedures. Once completed, press the F2 button to exit.

4.5.6 Prompt Window

During system operation, occasionally the UPS system needs to alert or remind the user of alarm

notifications or require the user to confirm a command or perform other operations. When this occurs,

a prompt window will pop up, as shown in Figure 68. Refer to Table 23 below for possible prompts

and the descriptions/actions to be taken.

Figure 68 Example of prompt window

1. Remove larger plastic bezel

2. Lift up on the LCD module

3. Swap the LCD module

4.Install the new LCD module

5. Replace l arger plastic bezel

Module Replacement

Liebert APS

2014-01-01

10:45:20

▲

LCD Board

Bypass Monitor Board

Bypass Control Board

Power Module

Battery Module

Charger Module

Module Replacement

Liebert APS

2014-01-01

10:45:20

▲

Module Replacement Screen

LCD Board Replacement Procedures

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 107 108

Keine Kommentare

Emerson Liebert APS Bedienungsanleitung Seite 66