Emerson easy-Drive Installationshandbuch PDF herunterladen (Seite 4)

Instruction Manual

D103597X012

D4 Valve with easy-Drive Actuator

November 2013

Table 1. Specifica tions

Valve Body Sizes and End Connection Styles

(1)

See table 2

Maximum Inlet Pressures and Temperatures

(1)

If the valve nameplate shows an ASME

pressure-temperature class, maximum inlet pressure

and temperature is consistent with the applicable

class per ASME B16.34. If the nameplate does not

show an ASME class, it will show a maximum cold

working pressure at 38_C(100_F) (for example, 293

bar [4250 psi])

Maximum Pressure Drops

(1)

See table 4

Shutoff Classification per ANSI/FCI 70-2

and IEC 60534-4

Class IV

Material Temperature Capabilities

(1)

Valve Body Assembly:

Standard Bonnet O-Ring: -40 to 135C(-40to275F)

Optional Fluorocarbon Bonnet O-Ring: -23 to 204C

(-10 to 400F)

Flow Characteristic

Equal percentage

Flow Direction

Flow up only

Port Diameters

See table 2

Valve Plug Travel

19 mm (0.75 inch)

Valve Plug Style

Micro-Form valve plug

Available ActuatorConfigurations

On/off (snap acting)

Positioning (flow or pressure control)

Power Requirements

12 or 24VDC, minimum 4 amp power supply required

(fuse to 5 amps)

Maximum Current Draw

4amps

Idle Current Draw

38 mA

Conduit Connections

Two 3/4 NPT connections

Stroke Length

19mm (0.75 inch)

Nominal Stroke Speed

(2)

3.9 mm/s (0.15 inch/s) at 24 VDC

2.2 mm/s (0.09 inch/s) at 12 VDC

Hazardous Area Approvals

CSA (C/US): ExplosionProof Class I, Division 1,

GroupsCandD,T6,ExdIIAT6,ClassI,Zone1,AExd

IIA T6

ATEX Flameproof - Gas:

II 2 G ,Ex d IIA T6

IECEx Flameproof - Gas: Ex d IIA T6

Enclosure Rating

Type 4X and IP66

Duty Cycle

50% maximum

Enclosure M aterial

Cast aluminum alloy with powder coat paint

Approximate Weight:

22 - 51 kg (49 - 113 lbs), depending upon

construction

1. The pressure or temperature limits in the referenced tables and a ny applicable ASME code limitations should not be exceeded.

2. 10% variation can be expected, based on temperature and pressure of application.

1 2 3 4 5 6 7 8 9 ... 37 38

Kommentare zu diesen Handbüchern

Keine Kommentare

Emerson easy-Drive Installationshandbuch Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Emerson easy-Drive