Emerson 3051S Bedienungsanleitung PDF herunterladen (Seite 9)

Rosemount 3051

September 2014

www.rosemount.com

Cleaning process area

P2 Cleaning for Special Service

P3 Cleaning for <1 PPM Chlorine/Fluorine

Flange adapters

(30)

/2 -14 NPT flange adapter(s) H

Vent/drain valves

D7 Coplanar Flange Without Drain/Vent Ports

Conduit plug

(9)(31)

316 SST Conduit Plug H

/4 RC

/2 process connection

(32)

RC ¼ Flange with RC ½ Flange Adapter - SST

Max static line pressure

P9 4500 psig (310,26 bar) Static Pressure Limit (3051CD Ranges 2–5 only) H

Ground screw

(9)(33)

External Ground Screw Assembly H

Surface finish

Q16 Surface finish certification for sanitary remote seals H

Toolkit total system performance reports

QZ Remote Seal System Performance Calculation Report H

Conduit electrical connector

(9)

M12, 4-pin, Male Connector (eurofast

) H

(9)

A size Mini, 4-pin, Male Connector (minifast

) H

NACE certificate

Q15

(34)

Certificate of Compliance to NACE MR0175/ISO 15156 for wetted materials H

Q25

(34)

Certificate of Compliance to NACE MR0103 for wetted materials H

Typical model number: 3051CD 2 A 2 2 A 1 A B4

(1) Select Configuration Buttons (option code D4 or DZ) or Local Operator Interface (option code M4) if local configuration buttons are required.

(2) If ordered with Wireless output code X, only Range 1-4, 316L SST diaphragm material (code 2), silicone fill fluid (code 1) and wireless housing (code P) are

available.

(3) 3051CD0 is only available with output code A and X. For output code A, only process flange code 0 (Alternate flange H2, H7, HJ or HK), isolating diaphragm code

2, O ring code A and bolting option L4 are available. For output code X, only process flange code 0 (Alternate flange H2), isolating diaphragm code 2, O ring code

A and bolting option L4 are available.

(4) Option HR5 configures the HART output to HART Revision 5. Option HR7 configures the HART output to HART Revision 7. The device can be field configured to

HART Revision 5 or 7 if desired. HART Revision 5 is the default HART output.

(5) For local addressing and configuration, M4 (Local Operator Interface) is required.

(6) Available approvals are FM Intrinsically Safe, (Option Code I5), CSA Intrinsically Safe (Option Code I6), ATEX Intrinsic Safety (Option Code I1), IECEx Intrinsic Safety

(Option Code I7) and EAC Intrinsic Safety (option code IM).

(7) Only available with C6, E2, E5, I5, K5, KB and E8 product certifications. Not available with GE, GM, SBS, DA0, M4, D4, DZ, QT, HR5, HR7, CR, CS, CT.

Table 1. 3051C Coplanar Pressure Transmitters Ordering Information

H The Standard offering represents the most common options. The starred options (H) should be selected for best delivery.

__The Expanded offering is subject to additional delivery lead time.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare

Emerson 3051S Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messen, Testen & Steuern Emerson 3051S