Emerson Bristol ControlWave ExpressPAC Bedienerhandbuch PDF herunterladen (Seite 80)

ControlWave ExpressPAC Instruction Manual (CI-ControlWave EPAC)

1. Start OpenBSI communications using NetView, TechView, or

LocalView, and select the RTU you want to test.

2. Select Start >Programs > OpenBSI Tools >Common Tools >

Diagnostics. The Main Diagnostics menu (Figure 5-6) opens.

Figure 5-6. WINDIAG Main Diagnostics Menu

3. Select the component to be tested. See Section 5.3.4 for a

description of the tests. Enter any prompted parameters (slot #,

etc.). WINDIAG performs the diagnostics and displays pass/fail

results.

After performing all diagnostic testing, exit WINDIAG.

4. Set switches SW2-3 and SW2-8 on the CPU module to ON. The

ControlWave ExpressPAC should resume normal operation.

5.3.4 Available Diagnostics

WINDIAG’s Main Diagnostics Menu (see Figure 5-6) provides the

following diagnostic selections:

Option Tests

CPU & Peripherals Checks the CPU/System Controller board except

for memory.

Analog Output Checks the AO on the Process I/O board.

High Speed Counter Checks HSCs on the Process I/O board and

5-12 Service & Troubleshooting Revised Mar-2011

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 95 96

Keine Kommentare

Emerson Bristol ControlWave ExpressPAC Bedienerhandbuch Seite 80