Emerson CMF200A Bedienungsanleitung PDF herunterladen (Seite 56)

56 Micro Motion

ELITE

Flow and Density Meters

Ordering information continued

Code Electronics interface

For Models CMFS010 and CMFS015

0 Model 2400S transmitter

1 Extended mount Model 2400S transmitter

2 4-wire polyurethane-painted aluminum integral enhanced core processor for remote mount transmitters

3 4-wire stainless steel integral enhanced core processor for remote mount transmitters

4 4-wire polyurethane-painted aluminum integral extended mount enhanced core processor for remote mount transmitters

5 4-wire extended mount stainless steel integral enhanced core processor for remote mount transmitters

(1)

(1) Must be ordered with FMT Filling Transmitter. Transmitter is welded to the sensor case.

Integral FMT Filling Transmitter

(1)

Integral FMT Filling Transmitter with improved surface finish (64 Ra)

(2)

(2) Available only with calibration option Z.

2-wire integrally mounted Model 2200S transmitter

(2)

2-wire extended Model 2200S transmitter

Code Conduit connections

For electronics interface codes 0, 1, K, J, U, and C

A Not applicable

For electronics interface codes 2, 3, 4, 5, H, T, Q, and A

B 1/2-inch NPT — no gland

E M20 — no gland

F Brass/nickel cable gland (cable diameter 0.335 to 0.394 inches [8.5 to 10 mm])

G Stainless steel cable gland (cable diameter 0.335 to 0.394 inches [8.5 to 10 mm])

For electronics interface codes R and S (9-wire junction box)

A 3/4-inch NPT — no gland

H Brass/nickel cable gland

J Stainless steel cable gland

Code Approvals

For electronics interface codes 0, 1, M, and N

M Micro Motion Standard (no approval)

N Micro Motion Standard / PED compliant

2 CSA C-US (U.S.A. and Canada) Class I, Div. 2

V ATEX — Equipment Category 3 (Zone 2) / PED compliant

3 IECEx Zone 2

Continued on next page

1 2 ... 51 52 53 54 55 56 57 58 59 60

Keine Kommentare

Emerson CMF200A Bedienungsanleitung Seite 56