Emerson ROC364 Bedienerhandbuch PDF herunterladen (Seite 6)

ROC364 Instruction Manual

1-2 General Information Rev Jun/05

1.1.1 FCC Information

This equipment complies with Part 68 of the Federal Communications Commission (FCC) rules. On the

modem assembly is a label that contains, among other information, the FCC certification number and

Ringer Equivalence Number (REN) for this equipment. If requested, this information must be provided

to the telephone company.

A FCC compliant telephone modular plug is provided with this equipment. This equipment is designed

to be connected to the telephone network or premises’ wiring, using a compatible modular jack that is

Part 68 compliant. See Installation Instructions for details.

The REN is used to determine the quantity of devices that may be connected to the telephone line.

Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming

call. Typically, the sum of the RENs should not exceed five (5.0). To be certain of the number of

devices that may be connected to a line (as determined by the total RENs), contact the local telephone

company.

If this equipment, dial-up modem, causes harm to the telephone network, the telephone company will

notify you in advance that temporary discontinuance of service may be required. But if advance notice is

not practical, the telephone company will notify the customer as soon as possible. Also, you will be

advised of your right to file a complaint with the FCC if you believe it necessary.

The telephone company may make changes to its facilities, equipment, operations, or procedures that

could affect the operation of the equipment. If this happens the telephone company will provide advance

notice so you can make the necessary modifications to maintain uninterrupted service.

If trouble is experienced with this equipment, dial-up modem, for repair or warranty information, please

contact Emerson Process Management, Flow Computer Division (641) 754-2578. If the equipment is

causing harm to the telephone network, the telephone company may request that you disconnect the

equipment until the problem is resolved.

1.3 Product Overview

The ROC364 is a microprocessor-based controller that provides the functions required for a variety of

field automation applications. The ROC364 is used primarily where there is a need for remote

monitoring, measurement, data archival, and control. You can configure the ROC364 for specific

applications including those requiring calculations, PID (Proportional, Integral, and Derivative) Loop

Control, and Function Sequence Tables (FSTs) logic/sequencing control.

The ROC364 features modularized field inputs and outputs (I/O), which provide the flexibility to meet

the requirements of a specific application. Up to 64 I/O modules can be used in any combination of

Discrete Inputs, Discrete Outputs, Analog Inputs, Analog Outputs, and Pulse Inputs.

The modular design of the ROC364 makes it cost-effective for both small and large applications. You

can select from a variety of communications and operator interface options to customize the installation

for a given system. The ROC is approved for use in Class I – Division 2 hazardous area locations.

The FlashPAC includes additional features contained in the firmware, such as 1992 American Gas

Association (AGA) flow calculations, Spontaneous-Report-by-Exception (SRBX or RBX) alarm

messaging, Local Display Panel configuring, and radio power control.

Figure 1-1 shows the major components that make up the ROC Master Controller Unit (MCU). Figure

2-6 shows the outline and mounting dimensions for the ROC364 controller. Refer to Section 2, Master

Controller Unit, I/O Module Rack, and Wiring, for further hardware and firmware details.

1 2 3 4 5 6 7 8 9 10 11 ... 145 146

Kommentare zu diesen Handbüchern

Keine Kommentare

Emerson ROC364 Bedienerhandbuch Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernbedienungen Emerson ROC364