Emerson FM-3 Betriebsanweisung PDF herunterladen (Seite 143)

124

Epsilon Eb and EN Drives Reference Manual

Torque Level 1 and 2 Setup

This function can be active in any Operating Mode.

1. Click on the Outputs tab.

2. Highlight the “Torque Level 1 Active or Torque Level 2 Active” output function in the

“Output Functions” window.

3. Select an Output Line radio button that corresponds to the output line you wish to assign

this function.

4. In Detailed Setup view, click on the Torque tab.

5. Enter a value into the Torque Level 1 and/or Torque Level 2. The Torque Levels

correspond to the Analog Full Scale parameter, which is defaulted to a 10V analog

command.

Figure 104: Torque Tab

Step 5: Entering Load Parameters

In Detailed Setup view select the Motor tab otherwise the EZ Setup tab can be used. The load

on the motor is specified by the Inertia Ratio and Friction parameters. Application

requirements are specified by the Response adjustment. If more accurate tuning is required,

see the “Tuning Procedures” section.

Note

Also, refer to the Enable High Performance Gains and Feedforward Gains features.

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 262 263

Keine Kommentare

Emerson FM-3 Betriebsanweisung Seite 143