Emerson 2400S Bedienungsanleitung PDF herunterladen (Seite 3)

Micro Motion

Model 2400S Transmitters 3

Physical specifications

Power supply – Analog and PROFIBUS-DP

Electrical connections

Housing NEMA 4X (IP66/67) polyurethane-painted cast aluminum or 316L stainless steel

Weight Transmitter is mounted integrally with sensor. For weight of flowmeter, see product data

sheet for sensor.

Mounting Model 2400S transmitters are mounted integrally with sensor. The transmitter can be rotated

on the sensor up to 360° in 45° increments.

Self-switching AC/DC input, automatically recognizes supply voltage.

Complies with low voltage directive 2006/95/EC per EN 61010-1 (IEC 61010-1).

Installation (Overvoltage) Category II, Pollution Degree 2.

AC • 85–265 VAC

• 50/60 Hz

• 4 watts typical, 7 watts maximum

DC • 18–100 VDC

• 4 watts typical, 7 watts maximum

Fuse • IEC 127-1.25 fuse, slow blow

Model 2400S Analog

Input and output connections Two pairs of wiring terminals for transmitter inputs/outputs. Screw terminals accept solid or

stranded conductors, 26 to 14 AWG (0.14 to 2.5 mm

Power connections One pair of wiring terminals accepts AC or DC power. One internal ground lug for power

supply ground wiring.

Screw terminals accept solid or stranded conductors, 26 to 14 AWG (0.14 to 2.5 mm

Digital communications

maintenance connections

Two clips for temporary connection to the service port.

Two clips for temporary connection to HART/Bell 202 terminals.

Model 2400S PROFIBUS-DP

PROFIBUS-DP segment One pair of wiring terminals for connection to PROFIBUS-DP segment. Connection type:

• Screw terminals accept solid or stranded conductors, 26 to 14 AWG (0.14 to 2.5 mm

• Five-pin PROFIBUS-DP M12 (Eurofast) female connector (optional).

Power connections One pair of wiring terminals accepts AC or DC power. One internal ground lug for power

supply ground wiring.

Screw terminals accept solid or stranded conductors, 26 to 14 AWG (0.14 to 2.5 mm

Digital communications

maintenance connections

Two clips for temporary connection to the service port.

Model 2400S DeviceNet

DeviceNet segment One pre-installed male 5-pin Eurofast connector for I/O and power

supply wiring.

Digital communications

maintenance connections

Two clips for temporary connection to the service port.

1 2 3 4 5 6 7 8 ... 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Emerson 2400S Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messen, Testen & Steuern Emerson 2400S