Emerson Epsilon Eb Digital Servo Drive Installationshandbuch PDF herunterladen (Seite 62)

Epsilon Eb Digital Servo Drive Installation Manual

ECI-44 External Connector Interface

The ECI-44 allows access to all command and input and output signals. The ECI-44 should

be mounted close to the drive and away from any high voltage wiring. The ECI-44 comes

complete with the hardware necessary for mounting to most DIN rail mounting tracks.

Figure 39: Dimensions of ECI-44

Note

Shield connection points are connected to the shell of the 44-pin “D” connector on the

ECI-44. Also, the shield connection points of the ECI-44 are also designed to provide a

point for cable strain relief.

Use tie wraps to provide a strain relief and a ground connection at the shield connection

points.

If you do not wish to use the DIN rail mounting hardware, the ECI-44 can be disassembled

and the mounting clips removed.

The ECI-44 wire range is #18 to 24 AWG stranded insulated wire.

Note

Wiring should be done with consideration for future troubleshooting and repair. All

wiring should be either color coded and/or tagged with industrial wire tabs. Low voltage

wiring should be routed away from high voltage wiring.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 99 100

Keine Kommentare

Emerson Epsilon Eb Digital Servo Drive Installationshandbuch Seite 62