Types 95LD and 95HD
2
Types 95LD and 95HD are small-size, large-
capacity, differential pressure regulators. They are
suitable for steam, air, gas, oil, water, and other uids
control. Typical applications include use on testing
xtures, wash tanks, sterilizers, steam tables,
fuel lines, and plant air supplies. The differential
pressure range of the Type 95LD regulator is from
2 to 30 psi (0,14 to 2,1 bar) (three spring ranges). The
Type 95HD differential pressure range is from
5 to 150 psi (0,34 to 10,3 bar) (seven spring ranges).
The Specications section gives some general
specications for the 95 Series differential pressure
regulators. The nameplates give detailed information
for a particular regulator as it comes from the factory.
Low-pressure differential regulator for
2 to 30 psi (0,14 to 2,1 bar) differential pressures
High-pressure differential regulator for
5 to 150 psi (0,34 to 10,3 bar) differential pressures
NPS 1/4:
1/4-inch (6,4 mm) orice
NPS 1/2 (DN 15):
3/8-inch (9,5 mm) orice
NPS 3/4 and 1 (DN 20 and 25):
9/16-inch (14 mm) orice
NPS 1-1/2 and 2 (DN 40 and 50):
1-1/16-inch (27 mm) orice
NPT, ASME anged 14-inch face-to-face
EN anged; 356 mm face-to-face, CL150 RF,
CL300 RF or SWE
See Table 1
See Table 2
Class IV
Class VI or better
Class IV
See Table 3
Handwheel
Internal with outside pressure source for
differential pressure or pressure loading
NPS 1/4 body: 4 pounds (2 kg)
NPS 1/2 (DN 15) body:
8 pounds (4 kg)
NPS 3/4 and 1 (DN 20 and 25) bodies:
20 pounds (9 kg)
NPS 1-1/2 and 2 (DN 40 and 50) bodies:
73 pounds (33 kg)
NPS 1/4 (DN 6) body:
6 pounds (3 kg)
NPS 1/2 (DN 15) body:
12 pounds (5 kg)
NPS 3/4 and 1 (DN 20 and 25) bodies:
32 pounds (15 kg)
1. The pressure/temperature limits in this Instruction Manual, and any applicable standard or code limitation should not be exceeded.
2. Pressures and/or the body end connection may decrease these maximum temperatures.
3. Fluorocarbon (FKM) is limited to 200°F (93°C) hot water.
95LD,
95HD
Cast Iron
Steel
Stainless Steel
-40° to 406°F (-40° to 208°C)
-20° to 450°F (-29° to 232°C)
-40° to 450°F (-40° to 232°C)
Nitrile (NBR)
Neoprene (CR)
Fluorocarbon (FKM)
(3)
Ethylenepropylene (EPDM)
PTFE
Stainless Steel (SST)
-40° to 180°F
-40° to 180°F
0° to 300°F
-40° to 275°F
-40° to 400°F
-40° to 650°F
(-40° to 82°C)
(-40° to 82°C)
(-18° to 149°C)
(-40° to 135°C)
(-40° to 204°C)
(-40° to 343°C)
(1 Seiten)
(1 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern