Emerson T208 Bedienerhandbuch Seite 9

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 12
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 8
T208 Series
9
Figure 5. Type T208M Section Drawing (External Registration)
ERSA02738
APPLY LUBRICANT (L)
(1)
:
L1 = SILICONE GREASE

To Convert Constructions
From Type T208 to Type T208M
A control line is needed. New parts required: keys 30,
31 and 34. Key numbers are referenced in Figures 4,
5 and 6.
1. Remove pipe plug (key 27) from the diaphragm
casing (key 4). Use this port to connect the control
line from upstream. See item number 5 in the
Installation section.
2. Refer to steps 1 through 3 in the Body Area
Maintenance section.
3. Insert the throat seal O-ring (key 31) and machine
screw (key 34).
4. Insert the stem seal O-ring (key 30) by following
steps 1 through 6 and 8 through 11 in the “To
Disassemble and Reassemble Diaphragm
Part” under Diaphragm and Spring Case Area
Maintenance section.
5. Reassemble following steps 7 through 10 of the
Body Area Maintenance section.
From Type T208M to Type T208
New part required: key 27. Key numbers are
referenced in Figures 4, 5 and 6.
1. Insert pipe plug (key 27) in the diaphragm casing
(key 4).
2. Follow steps 1 through 6 and 8 through 11 in the
“To Disassemble and Reassemble Diaphragm Part”
under Diaphragm and Spring Case Area Maintenance
section to remove the stem O-ring (key 30).
3. Follow steps 1 through 5 of Body Area
Maintenance to remove the throat seal O-ring
(key 31) and machine screw (key 34).
4. Reassemble following steps 7 through 10 of
Body Area Maintenance section.
1. Lubricants must be selected such that they meet the temperature requirements.
TORQUE:
60 TO 72 INCH-POUNDS / 6.8 TO 8.1 N•m
TORQUE:
14 TO 19 INCH-POUNDS / 1.6 TO 2.1 N•m
TORQUE:
340 TO 470 INCH-POUNDS / 38.5 TO 53.1 N•m
107458161230114942 17
44
97503663514
18
313441 5
38
L1
L1
L1 L1
L1
L2 L2
Seitenansicht 8
1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare