Emerson GXT3-240TBATTCE Bedienungsanleitung PDF herunterladen (Seite 13)

Unpacking the UPS and Site Preparation

2.6 Environmental Conditions

The Liebert GXT3-10000T230 must be installed vertically, on a level and even surface and in an area

protected from extreme temperatures, water, humidity and the presence of conductive powder or dust

(see Table 11). Do not stack units; do not place any objects on top of a unit.

2.7 Access required

The area must have sufficient space for installation procedures and for routine maintenance. Access

doors must be sufficiently large to permit passage of the UPS.

2.8 Floor/Rack Loading

Ensure that the floor where the UPS/batteries will be installed will support the unit’s weight (see

Table 10 for the unit’s weight).

2.9 Inventory List

The Liebert GXT3-10000T230 comes with:

• CD containing:

• Liebert MultiLink

Shutdown Software

•Configuration Software

• User Manual

•USB cable

• Terminal block communication terminals

• Floor mount brackets

• Input power configuration jumpers

• Paralleling cable

2.10 Clearance

The UPS is fitted with wheels for ease of movement over short distances. Leave 300mm (12in.)

around the sides and rear of the unit to allow a flow of air and to provide access for any routine main-

tenance that may involve removal of the panels.

2.11 Repacking the UPS

To repack the UPS, proceed as follows:

1. Do not pack the equipment until at least six hours have elapsed since the last recharge.

2. Make sure to re-use the original packing material to ship the UPS.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Keine Kommentare

Emerson GXT3-240TBATTCE Bedienungsanleitung Seite 13