Emerson MPH2 Wartungshandbuch PDF herunterladen (Seite 25)

Operation

21 Emerson

MPH2

™

3.1.2 Adjusting the Onboard LCD’s Contrast

The onboard LCD is factory-set to be easily viewed in lighting conditions found in most work places.

The contrast can be changed. To change the contrast:

1. Press any key to activate the LCD.

2. Press either the Right or Left arrow key to highlight the contrast icon, a circle half dark and half

white.

3. Press the Select key.

4. Use the Right or Left arrow key to highlight the Up or Down contrast icon (each is an arrow). Use

the pattern to determine when the contrast is acceptable.

5. Press Select until the screen’s contrast is satisfactory

Figure 17 Adjust LCD contrast

NOTE

The same steps apply to the RPC BDM.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Keine Kommentare

Emerson MPH2 Wartungshandbuch Seite 25