Emerson MONITORING OpenComms Bedienungsanleitung PDF herunterladen (Seite 14)

Installation

the Enter key on your keyboard. This will initiate

communications with the card and the following screen should be

displayed.

Figure 4 NIC main menu in HyperTerminal

(You can also cycle power on the OpenComms NIC card. This will

also initiate communications and provide information on current

revision status.)

6. When the message “Initializing Network…” appears, hit the

Enter key on your keyboard. (Additional network information

may appear)

CAUTION

Cycling power on either the 7200 or the HiPulse UPS is not

recommended unless the unit is in bypass mode. Consult the

UPS user manual for further instructions.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 55 56

Keine Kommentare

Emerson MONITORING OpenComms Bedienungsanleitung Seite 14