Product Data Sheet
00813-0100-4420, Rev BA
Catalog 2008 - 2009
1420 Wireless Gateway
Wireless-6
Product Certifications
Approved Manufacturing Locations
Rosemount Inc. – Chanhassen, Minnesota, USA
Telecommunication Compliance
All wireless devices require certification to ensure that they adhere
to regulations regarding the use of the RF spectrum. Nearly every
country requires this type of product certification. Emerson is
working with governmental agencies around the world to supply
fully compliant products and remove the risk of violating country
directives or laws governing wireless device usage. To see which
countries our devices have received certification for use in, see
www.rosemount.com/smartwireless.
European Union Directive Information
The EC declaration of conformity for all applicable European
directives for this product can be found on the Rosemount website
at www.rosemount.com. A hard copy may be obtained by
contacting your local sales representative.
ATEX Directive (94/9/EC)
Emerson Process Management complies with the ATEX
Directive.
Electro Magnetic Compatibility (EMC) (2004/108/EC)
EN 61326-1: 1997 with amendments A1, A2, and A3 -
Industrial
Radio and Telecommunications Terminal Equipment
Directive (R&TTE)(1999/S/EC)
Emerson Process Management complies with the R&TTE
Directive
CE EMC Marking
Compliance with European Union EMC
Hazardous Location Certifications
(1)
North American Certifications
Factory Mutual (FM) Approvals
N5 FM Division 2 (Non-incendive)
Certificate Number: 3028321
Nonincendive for Class I, Division 2, Groups A,B,C, and D;
Dust Ignitionproof for Class II,III, Division 1,
Groups E,F, and G; Indoor/outdoor locations;
NEMA Type 4X
Temperature Code: T4 (T
amb
=-40°C TO +60°C)
Canadian Standards Association (CSA)
N6 CSA Division 2 & Dust Ignitionproof
Certificate Number: 1849337
Suitable for Class I, Division 2, Groups A,B,C,D;
Dust Ignitionproof for Class II, Groups E,F, and G;
Suitable for Class III Hazardous Locations.
Install per Rosemount drawing 01420-1011.
Temperature Code: T4(-40°C < T
a
< 60°C)
CSA Enclosure Type 4X
European Certification
N1 ATEX Type n (ATEX)
See note below
Certificate Number: BASEEFA07ATEX0057X
ATEX Marking: Ex II 3 G
EEx nA nL IIC T4 (-40°C < T
a
< 60°C)
ND ATEX Dust Ignition-proof Approval
Certificate Number: BASEEFA07ATEX0056x
Ex tD A22 IP66 T135 (-40 °C< Ta < +60)
EEx nA nL IIC T4 (-40°C < T
a
< 60°C) II 3D
Vmax = 28V
IECEx Certification
N7 IECEx Type n
See note below
Certificate Number:IECEx BAS 07.0012x
Ex nC IIC T4 (-40°C =< T
a
<= +60°C)
Rated Voltage: 28V
NF IECEx Dust Ignition-proof Approval
Certificate Number: IECEx BAS 07.0013
Ex tD A22 IP66 T135 (-40°C < T
a
< 60°C)
Vmax = 28V
CONDITIONS OF INSTALLING N1 AND N7:
The Apparatus is not capable of withstanding the 500V insulation
test required by Clause 9.4 of EN 60079-15: 2005. This must be
taken into account when installing the apparatus.
(1) Includes remote antenna as required. For approval, all
cabling for Modbus, Ethernet, and power must be
shielded.
TABLE 1.
Country Restriction
Bulgaria General authorization required for outdoor use
and public service
France Outdoor use limited to 10mW e.i.r.p.
Italy If used outside of own premises, general
authorization is required.
Norway May be restricted in the geographical area
within a radius of 20 km from the center of
Ny-Alesund.
Romania Use on a secondary basis. Individual license
required.
(102 Seiten)
(118 Seiten)
(166 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern