Emerson Liebert IntelliSlot IS-WEBRT3 Card Bedienungsanleitung PDF herunterladen (Seite 7)

Installation

3.0 INSTALLATION

Before using the Liebert Web Card, the hardware and software configuration is necessary.

1. Install the Liebert IS-WEBRT3 card in the Liebert IntelliSlot

bay on the UPS.

The bay may be protected with a plastic cover.

2. Attach an RJ-45 Ethernet cable, CAT5 or better, to the card and to your network.

3. Install Liebert DeskPro-Net Utility on your computer.

a. Insert the included DeskPro-Net Utility CD in the monitoring computer.

b. Follow the prompts to install the software.

After complete installation, DeskPro-Net Utility will appear in Start>Programs.

Figure 2 Liebert IS-WEBRT3 installation

Figure 3 Installation steps

Insert the Liebert

IS-WEBRT3 card

Connect a network

cable to the Liebert

IS-WEBRT3 card

Connect the Liebert IS-WEBRT3

Card, UPS and Network

Set up the Liebert IS-WEBRT3

Card’s IP Address Using

DeskPro-Net Utility

Use a Web Browser to Connect to

Liebert IS-WEBRT3 Card

by its IP Address

Use DeskPro-Net Utility to Connect

to Liebert IS-WEBRT3 Card

Use Telnet to Configure the Liebert

IS-WEBRT3 Card UPS Settings

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Keine Kommentare

Emerson Liebert IntelliSlot IS-WEBRT3 Card Bedienungsanleitung Seite 7