Emerson Mesa Sole Spezifikationen PDF herunterladen (Seite 10)

Emerson Network Power

Wireline Products

631-205-105

Version C, August 2009

Outside Plant Equipment Proprietary Information Page 5 of 23

2.5 Cabinet Features

2.5.1 Cabinet Access - The MESA

SOLE has an environmentally sealed door to access

the equipment chamber.

The cabinet has two

-turn fasteners securing the door. The

-turn fasteners

are opened with a T-Handle tamper-resistant wrench,

-inch hex/pin tool

supplied with the cabinet.

• For additional security, a padlock can be installed on the lower

-turn

security bolt.

The door has an intrusion alarm switch, and self-locking wind latches to secure

the door in the open position during installation or maintenance.

2.5.2 Mounting options - The cabinet is designed to be wall, pole, or pad mounted.

The cabinet shall be lifted into place using the lifting eyes provided on the top of

the cabinet.

When pad mounting,

• A rubber pad will be provided to isolate the cabinet from the concrete pad.

• A universal pad-mounting template can be ordered as an option.

2.5.3 Equipment Rails - The equipment chamber is equipped with 23" (58.42 cm) wide

equipment rails. The equipment rails are zinc-dichromate conductive steel with

12-24 tapped holes on 1 inch (2.54 cm) centers.

Each equipment mounting rail is bonded by contact through the cabinet chassis to

the Master Ground Bar (MGB).

The equipment mounting rails are designed to accept standard 12 inch (30.48 cm)

deep with 5-in. (12.7 cm) front offset mounted equipment.

2.5.4 Vertical Rack space - There is 25 inches (63.50 cm) of unobstructed vertical

mounting space in the equipment chamber door opening. A total of 28 inches

(71.12 cm) of rack space is available.

2.5.5 Environmental Control - The cabinet is equipped with a door mounted heat

exchanger, which is capable of removing 650 Watts of heat at 65

2.5.6 Cable Entry - Cable entry is through one 4-in. (10.16 cm) inside diameter cable

cone, one 1-inch (2.54 cm) grommeted opening, and one 3/4" opening.

2.5.7 Grounding - The equipment chamber contains two 6-position, 2-hole ground bars.

One ground bar is isolated from the cabinet frame.

2.5.8 Optional Battery Compartment - The MESA

SOLE cabinet can be ordered

with an optional ventilated battery compartment.

• A battery heater pad is factory installed to protect batteries in colder

environments.

2.5.9 AC Power Box - The MESA

SOLE cabinet is equipped with a 2-position load

center to accommodate customer-supplied AC power.

2.5.10 AC Convenience Outlet - Ground Circuit Fault Interrupter (GFCI) protected 15

Amp outlet is provided for use by field personnel for installation and maintenance

operations. The outlet is located in the equipment chamber.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Emerson Mesa Sole Spezifikationen Seite 10

Kommentare zu diesen Handbüchern