READ AND SAVE THESE INSTRUCTIONSPart No. F40BP74050000 Form No. BP7405U.L. Model No.: CF830Net Weight: 35.3 Lbs.Model NumberMONACO™60” Ceiling FanOwn
10U.L. Model No.: CF830U.L. Model No.: CF830Turning off wall switch is not sufficient. To avoidpossible electrical shock, be sure electricity isturned
11U.L. Model No.: CF830U.L. Model No.: CF830Figure 22DASH LINES ARE 3CONDUCTOR CABLEW/GROUND WIREBETWEEN CEILINGAND WALL OUTLETBOXES120V ACSUPPLYSOURC
Operating Your Ceiling Fanwith the Wall ControlIMPORTANTFan installation must be completed, including theinstallation of the fan blades, before testin
13U.L. Model No.: CF830MaintenanceIMPORTANT CARE INSTRUCTIONSfor your Ceiling FanPeriodic cleaning of your new ceiling fan is the onlymaintenance that
14U.L. Model No.: CF830Repair Parts71215398171816146132622111921201224252343211054
15U.L. Model No.: CF830U.L. Model No.: CF830Repair Parts ListingKeyModel No.No. Description CF830GES00* Hanger Pack, Consisting of: 761655-871 Hanger
Air Comfort ProductsDIVISION OF EMERSON ELECTRIC CO.8100 W. Florissant • St. Louis, MO 63136Printed in China 01/10 Form No. BP7405Part No. F40BP7405
2WARNINGWARNING: To avoid fire, shock, and serious personal injury, follow these instructions.Safety Instructions1. Read your owner’s manual carefully
3This Manual Is Designed to Make it as Easy as Possible for You toAssemble, Install, Operate and Maintain Your Ceiling FanOne stepladderOne wire strip
1. Position the flange medallion upside down on asoft, clean surface. Place the blade with thedecorative side facing down onto the flangemedallion. At
CAUTION: Before installing and tightening thescrews, be sure there are no wires pinchedbetween the switch housing adapter and theswitch housing.8. Mak
It is critical that the clevis pin in the motor couplingis properly installed and the setscrew securelytightened. Failure to verify that the pin and s
721. Position the ceiling cover over the downrod. Besure the cover is oriented correctly, with the largeopening at the top (Figure 11).U.L. Model No.:
8The outlet box and joist must be securely mountedand capable of supporting at least 50 lbs. Use only aU.L. outlet box listed as “Acceptable for Fan S
9Turning off wall switch is not sufficient. To avoidpossible electrical shock, be sure electricity isturned off at the main fuse or circuit breaker bo
Kommentare zu diesen Handbüchern