Emerson 133 Series Second-Stage Regulators Bedienerhandbuch PDF herunterladen

133 Series

D100270X012

June 2013

Instruction Manual

Form 5007

133 Series Direct-Operated Regulators

W1327

Figure 1. 133 Series Gas Regulators

W1327

TYPES 133H, 133L, AND 133Z REGULATORS

W6803

TYPE 133HP REGULATOR

Table of Contents

Introduction...................................................................1

Speci cations...............................................................2

Principle of Operation...................................................2

Installation.....................................................................3

Overpressure Protection..............................................4

Startup..........................................................................4

Adjustment....................................................................5

Shutdown......................................................................6

Maintenance.................................................................6

Parts Ordering.............................................................11

Parts List.................................................................... 11

WARNING

Failure to follow these instructions or

to properly install and maintain this

equipment could result in an explosion

and/or  re causing property damage and

personal injury or death.

Fisher

regulators must be installed,

operated, and maintained in accordance

with federal, state, and local codes,

rules and regulations, and Emerson

Process Management Regulator

Technologies, Inc. (Regulator

Technologies) instructions.

If the regulator vents gas or a leak

develops in the system, service to the unit

may be required. Failure to correct trouble

could result in a hazardous condition.

Call a gas service person to service the

unit. Only a quali ed person must install

or service the regulator.

Introduction

Scope of the Manual

This manual provides speci cations, installation,

adjustment and maintenance instructions, and parts

ordering information for the 133 Series regulators.

Only personnel quali ed through training or experience

should install, operate, and maintain this regulator. If

there are any questions concerning these instructions,

contact your local Sales Of ce before proceeding.

Product Description

The 133 Series direct-operated gas regulators, shown

in Figure 1 are primarily designed for industrial and

commercial applications supplying gas to furnaces,

burners, and other appliances. The 133 Series

www.fisherregulators.com

1 2 3 4 5 6 ... 15 16

133 Series 1

Inhaltsverzeichnis

Seite 1 - 133 Series

133 SeriesD100270X012June 2013Instruction ManualForm 5007133 Series Direct-Operated RegulatorsW1327Figure 1. 133 Series Gas RegulatorsW1327TYPES 133H

Seite 2

133 Series10WHEN ASSEMBLING THE ACTUATOR, THE UPPER CASING AND ADAPTOR SHOULD BE POSITIONED SO THAT TWO HOLES IN THE 5.25-inch / 133 mm BOLT HOLE CIRC

Seite 3

133 Series11bolt circle in the mounting plate adaptor (key 56) must be spaced (aligned) an equal distance over the downstream control line connection.

Seite 4

133 Series12 * Recommended spare parts. 1. If the 2 inches w.c. to 2 psig / 5 mbar to 0.14 bar springs listed under Type 133L are used in the Type

Seite 5

133 Series13 * Recommended spare parts. 1. If the 2 inches w.c. to 2 psig / 5 mbar to 0.14 bar springs listed under Type 133L are used in the Type

Seite 6

133 Series14Figure 13. Optional Restriction Collar AssemblyFigure 12. Type 133Z Assembly40A30711018161744411193635232225239342829312161320124542148H

Seite 7

133 Series15Figure 14. Type 133HP Actuator AssemblyA7011/IL98125849501514135360233923522335442628293111591041206257556357343217255A192730124215136521

Seite 8

133 Series *Recommended spare parts.Key Description Part Number 34 Locknut, Plated alloy steel (4 required) 10A3063X012 35 Cap Screw, Zinc-p

Seite 9

133 Series2SpecicationsThe Specications section lists the specications for the Type 133 Series direct-operated regulators. Factory specication is

Seite 10

133 Series3Figure 2. Operational Schematic of Type 133L Regulator (Also Typical of Type 133H)A6555downstream system. Decreased demand increases the

Seite 11

133 Series4Figure 3. Operational Schematic of Type 133HPIf the regulator has threaded end connections, coat external threads with pipe compound. For

Seite 12

133 Series5Table 1. 133 Series Outlet Pressure Ranges, Control SpringsTable 2. Maximum Inlet and Outlet PressuresTYPEOUTLET PRESSURE RANGECONTROL SP

Seite 13

133 Series6Figure 4. Spring Case Inserted in Body for Disassembly. Note Proper Method of Holding Stem and Sleeve When Loosening or Tightening Stem N

Seite 14

133 Series7W1372/ILFigure 5. Inspecting Guide Bushing and Stem Seal O-ring W1371/ILFigure 6. Installing Balancing Diaphragm. The Side of Diaphragm

Seite 15

133 Series8ReassemblyReassemble in reverse order of the above steps. When reassembling, observe the following steps and cautions.1. If the spring c

Seite 16

133 Series918201361PROTECT THE O-RING SURFACE FROM DAMAGE3/4-inch / 19 mm STEM HEX16581415A7007Figure 7. Stem and Diaphragm Assemblythe stem (key 18)

Kommentare zu diesen Handbüchern

Keine Kommentare

Emerson 133 Series Second-Stage Regulators Bedienerhandbuch

Stöbern Sie online oder laden Sie Bedienerhandbuch nach Kfz-Zubehör & Komponenten Emerson 133 Series Second-Stage Regulators herunter. Emerson 133 Series Second-Stage Regulators Instruction Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kfz-Zubehör & Komponenten Emerson 133 Series Second-Stage Regulators